The host computer
í
system normally is the
server.
Preparing the Host Computer System
Power Off the Computer
p
Turn off the power switch.
p
Unplug the cord from the AC outlet.
Confirm and/or Install the SCSI Host Interface
The VLS must be connected to either an integrated SCSI
host or a SCSI interface (host adapter card installed in the
computer – either directly to the I/O connector on the card or
as part of an existing SCSI chain. The SCSI interface must
be installed before you connect the VLS. Refer to the
instructions supplied with the card.
Now you are ready to connect the VLS to your host
computer. Follow the instructions provided in the next
chapter.
Getting Started
9