ADIC Scalar 100 User Manual page 267

0 input errors; 0 output errors
0 collisions
value = 18 = 0x12
Gateway >
inetstatShow
The inetstatShow command displays statistics about Internet protocol sockets
for the Ethernet network. Interpreting these statistics requires detailed knowledge
of Internet networking protocols. This information may be useful to the LAN
administrator.
Gateway > inetstatShow
Active Internet connections (including servers)
PCB Proto Recv-Q Send-Q Local Address
(state)
-------- ----- ------ ------ ------------------ ---------------
--- -------
c1fee18c TCP
ESTABLISHED
c1fee40c TCP
c1fee58c TCP
c1fee68c TCP
c1feea0c TCP
c1fee48c UDP
value = 1 = 0x1
Gateway >
initializeBox
The initializeBox command removes configuration files, such as
management configuration and SCSI device maps, and then prompts to reboot.
ipstatShow
The ipstatShow command displays Internet protocol statistics for the Ethernet
network. Interpreting these statistics requires detailed knowledge of Internet
networking protocols. This information may be useful to the LAN administrator.
Gateway > ipstatShow
badsum
tooshort
toosmall
inetstatShow
0 0 192.168.1.59.23
0 0 0.0.0.0.52787
0 0 0.0.0.0.21
0 0 0.0.0.0.23
0 0 0.0.0.0.513
0 0 0.0.0.0.161
Attention: Use this function with care as data may be lost as a result
of devices moving to different LUNs when the mapping database is
removed. Make sure all I/O has been stopped.
total 8380
0
0
0
Foreign Address
206.0.64.117.4239
0.0.0.0.0 LISTEN
0.0.0.0.0 LISTEN
0.0.0.0.0 LISTEN
0.0.0.0.0 LISTEN
0.0.0.0.0
251