One possible configuration of the of the SNC 6101 is illustrated below.
Configuration Support
The SNC 6101 provides two Fibre Channel (FC) interfaces. These FC interfaces are configured with small
form factor pluggable transceiver (SFP) modules. In addition, the SNC 6101 provides four Ultra320 SCSI
interfaces as illustrated in
signaling.
Address Mapping
The SNC 6101 maps addresses across and between these different interfaces and preserves the
persistency of the address maps across power ups of systems, devices, and Scalar 100.
Interface Protocol Awareness
The SNC 6101 processes SCSI-3 and SCSI-2 protocols for disk, tape, and tape medium changer devices.
It can report the host and devices that are attached to its interfaces. The SNC 6101 has the capability to
manage the access security between end points on the FC interface and the SCSI channels.
ADIC Management Console
The ADIC Management Console (AMC) offers remote, centralized management of Scalar storage
networking libraries. Features of the AMC include:
•
Management and monitoring of multiple Scalar libraries at the same time
•
Customizable, graphical view of ADIC libraries
6
Figure 1
on page 8. These Ultra320 interfaces are capable of both SE and LVD
Description