H3C S6812 Series Command Reference Manual page 1867

Related commands
aaa nas-id profile
portal nas-port-id format
Use portal nas-port-id format to specify the NAS-Port-ID attribute format.
Use undo portal nas-port-id format to restore the default.
Syntax
portal nas-port-id format { 1 | 2 | 3 | 4 }
undo portal nas-port-id format
Default
The format for the NAS-Port-ID attribute is format 2.
Views
System view
Predefined user roles
network-admin
Parameters
1: Uses format 1 for the NAS-Port-ID attribute. Format 1 is expressed as follows:
{atm|eth|trunk} NAS_slot/NAS_subslot/NAS_port:XPI.XCI
AccessNodeIdentifier/ANI_rack/ANI_frame/ANI_slot/ANI_subslot/ANI_port[:ANI_XPI.ANI_XCI
].
2: Uses format 2 for the NAS-Port-ID attribute. Format 2 is expressed as SlotID/00/IfNO/VlanID.
3: Uses
SlotID/00/IfNO/VlanID/DHCP option.
4: Uses
slot=**;subslot=**;port=**;vlanid=**;vlanid2=**;.
Usage guidelines
The NAS-Port-ID format supported by RADIUS servers varies by vendor. Use this command to
specify the format of the NAS-Port-ID attribute in the RADIUS packets sent for portal users to the
RADIUS server. The device then automatically constructs a value for the NAS-Port-ID attribute in the
specified format to meet the RADIUS server requirements.
The following describes details about formats for the NAS-Port-ID attribute.
•
Format 1—{atm|eth|trunk} NAS_slot/NAS_subslot/NAS_port:XPI.XCI
AccessNodeIdentifier/ANI_rack/ANI_frame/ANI_slot/ANI_subslot/ANI_port[:ANI_XPI.ANI_XCI
]
Format 1 contains three space-separated strings. Spaces are not allowed within a string.
Braces enclose a set of required field choices separated by vertical bars, from which one must
be selected. Square brackets enclose an optional field.
Table 10 Format 1 description
Field
{atm|eth|trunk}
format 3 for the
format 4 for the
NAS-Port-ID attribute.
NAS-Port-ID attribute.
Description
Interface type of the BRAS:
•
atm—ATM interface.
•
eth—Common Ethernet interface.
53
Format 3 is expressed
Format 4 is expressed
as
as