H3C S6812 Series Command Reference Manual page 1702

ipv6 ipv6-address: Specifies a DAE client by its IPv6 address.
key: Specifies the shared key for secure communication between the RADIUS DAE client and server.
Make sure the shared key is the same as the key configured on the RADIUS DAE client. If the
RADIUS DAE client does not have any shared key, do not specify this option.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
•
In non-FIPS mode, the encrypted form of the key is a string of 1 to 117 characters. The plaintext
form of the key is a string of 1 to 64 characters.
•
In FIPS mode, the encrypted form of the key is a string of 15 to 117 characters. The plaintext
form of the key is a string of 15 to 64 characters. The plaintext string must contain characters
from digits, uppercase letters, lowercase letters, and special characters.
Usage guidelines
With the RADIUS DAE server feature, the device listens to the default or specified UDP port to
receive DAE requests from the specified DAE clients. The device processes the requests and sends
DAE responses to the DAE clients.
The device discards any DAE packets sent from DAE clients that are not specified for the DAE
server.
You can execute the client command multiple times to specify multiple DAE clients for the DAE
server.
Examples
# Specify the DAE client as 10.110.1.2. Set the shared key to 123456 in plaintext form for secure
communication between the DAE server and client.
<Sysname> system-view
[Sysname] radius dynamic-author server
[Sysname-radius-da-server] client ip 10.110.1.2 key simple 123456
Related commands
radius dynamic-author server
port
data-flow-format (RADIUS scheme view)
Use data-flow-format to set the data flow and packet measurement units for traffic statistics.
Use undo data-flow-format to restore the default.
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
Default
Traffic is counted in bytes and packets.
Views
RADIUS scheme view
61