Field
Sub-VLANs (1 in total)
Related commands
reset ipv6 multicast-vlan group
ipv6 multicast-vlan
Use ipv6 multicast-vlan to configure an IPv6 multicast VLAN and enter its view, or enter the view of
an existing IPv6 multicast VLAN.
Use undo ipv6 multicast-vlan to remove the configuration of IPv6 multicast VLANs.
Syntax
ipv6 multicast-vlan vlan-id
undo ipv6 multicast-vlan { all | vlan-id }
Default
No IPv6 multicast VLANs exist.
Views
System view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies an existing VLAN ID in the range of 1 to 4094.
all: Specifies all IPv6 multicast VLANs.
Usage guidelines
The total number of IPv6 multicast VLANs on a device cannot exceed the system upper limit.
You must enable MLD snooping for the VLAN to be configured as an IPv6 multicast VLAN.
Examples
# Enable MLD snooping for VLAN 100. Configure VLAN 100 as an IPv6 multicast VLAN and enter its
view.
<Sysname> system-view
[Sysname] mld-snooping
Description
multicast VLAN.
•
0x40—The entry is to be deleted.
•
0x10000000—This value represents one of the following
situations:
The entry is newly created.
The device receives an MLD query within an MLD
general query interval.
•
0x20000000—The device does not receive MLDv1 or
MLDv2 reports that match the entry within an MLD general
query interval.
•
0x40000000—The device does not receive MLDv2 IS_EX
(NULL) reports that match the entry within an MLD general
query interval.
Sub-VLAN list of the IPv6 multicast VLAN, and the total number
of the sub-VLANs.
5