H3C S6812 Series Command Reference Manual page 1844

portal server
ipv6
Use ipv6 to specify the IP address of an IPv6 portal authentication server.
Use undo ipv6 to restore the default.
Syntax
ipv6 ipv6-address [ key { cipher | simple } string ]
undo ipv6
Default
The IP address of the IPv6 portal authentication server is not specified.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the IP address of the IPv6 portal authentication server.
key: Specifies a shared key for communication with the portal authentication server. Portal packets
exchanged between the access device and the portal authentication server carry an authenticator
that is generated with the shared key. The receiver uses the authenticator to check the correctness
of the received portal packets.
cipher: Specifies a key in encrypted form.
simple: Specifies a key in plaintext form. For security purposes, the key in plaintext form will be
stored in encrypted form.
string: Specifies the key. Its plaintext form is a case-sensitive string of 1 to 64 characters. Its
encrypted form is a case-sensitive string of 1 to 117 characters.
Usage guidelines
A portal authentication server has only one IPv6 address. Therefore in portal authentication server
view, only one IPv6 address exists. If you execute this command multiple times, the most recent
configuration takes effect.
Do not configure the same IPv6 address for different portal authentication servers.
Examples
# Configure the IP address of IPv6 portal authentication server pts as 2000::1 and the plaintext key
as portal.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] ipv6 2000::1 key simple portal
Related commands
display portal server
portal server
30