H3C S6812 Series Command Reference Manual page 1845

nas-port-type
Use nas-port-type to specify the NAS-Port-Type value carried in RADIUS requests sent to the
RADIUS server.
Use undo nas-port-type to restore the default.
Syntax
nas-port-type value
undo nas-port-type
Default
The NAS-Port-Type value carried in RADIUS requests is 0.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
value: Specifies the NAS-Port-Type value in the range of 1 to 255.
Usage guidelines
Some MAC binding servers identify MAC-based quick portal authentication by a specific
NAS-Port-Type value in received RADIUS requests. To communicate with such a MAC binding
server, you must configure the device to use the NAS-Port-Type value required by the MAC binding
server.
Examples
# Set the NAS-Port-Type value in RADIUS requests sent to MAC binding server mts to 30.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] nas-port-type 30
Related commands
display mac-trigger-server
port (MAC binding server view)
Use port to set the UDP port number the MAC binding server uses to listen for MAC binding query
packets.
Use undo port to restore the default.
Syntax
port port-number
undo port
Default
The MAC binding server listens for MAC binding query packets on UDP port 50100.
Views
MAC binding server view
31