H3C S6812 Series Command Reference Manual page 1603

qos wrr
WFQ commands
display qos queue wfq interface
Use display qos queue wfq interface to display the WFQ configuration of an interface.
Syntax
display qos queue wfq interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the WFQ configuration of all interfaces.
Examples
# Display the WFQ configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos wfq interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Output queue: Hardware Weighted Fair Queuing
Queue ID
--------------------------------------------------------------------------------
0
1
2
3
4
5
6
7
Table 21 Command output
Field
Interface
Output queue
Group
Byte-count
Min Bandwidth
Queue name Group
be 1
af1 1
af2 1
af3 1
af4 1
ef 1
cs6 1
cs7 1
Description
Interface type and interface number.
Type of the current output queue.
Number of the group that holds the queue. By default, all queues are in
group 1.
Byte-count scheduling weight of the queue.
Minimum guaranteed bandwidth for the queue.
Byte count
1
1
1
1
1
1
1
1
52
Min Bandwidth
64
64
64
64
64
64
64
64