H3C S6812 Series Command Reference Manual page 1885

1111-1111-1111 the URL http://www.test.com/portal?usermac=xxxxxxxxx&userip=1.1.1.1&userurl=
http://www.test.com/welcome, where xxxxxxxxx represents the encrypted user MAC address.
Examples
# Configure URL parameters userip and userurl for the portal Web server wbs. Configure the value
of the userip parameter as source-address (the IP addresses of users) and that of the userurl
parameter as http://www.abc.com/welcome.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] url-parameter userip source-address
[Sysname-portal-websvr-wbs] url-parameter userurl value http://www.abc.com/welcome
# Configure URL parameter usermac for the portal Web server wbs. Configure the value of the
usermac parameter as source-mac (the MAC addresses of users) and specify DES to encrypt the
MAC addresses.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] url-parameter usermac source-mac encryption des key simple
12345678
Related commands
display portal web-server
url
user-sync
Use user-sync to enable portal user synchronization for a portal authentication server.
Use undo user-sync to disable portal user synchronization for a portal authentication server.
Syntax
user-sync timeout timeout
undo user-sync
Default
Portal user synchronization is disabled for a portal authentication server.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
timeout timeout: Sets a detection timeout for synchronization packets, in the range of 60 to 18000
seconds.
Usage guidelines
After this feature is enabled, the device replies to and periodically detects the synchronization
packets from the portal authentication server. In this way, information about online portal users on
the device and on the portal authentication server remains consistent.
Portal user synchronization requires that the portal authentication server support the portal user
heartbeat feature. Now, only the IMC portal authentication server supports portal user heartbeat. To
implement portal user synchronization, you need to configure the user heartbeat feature on the
portal authentication server. Make sure the user heartbeat interval configured on the portal
71