H3C S6812 Series Command Reference Manual page 1532

<Sysname> system-view
[Sysname] packet-filter default deny
Related commands
display packet-filter
display packet-filter statistics
display packet-filter verbose
packet-filter filter
Use packet-filter filter to specify the applicable scope of packet filtering on a VLAN interface.
Use undo packet-filter filter to restore the default.
Syntax
packet-filter filter [ route | all ]
undo packet-filter filter
Default
The packet filtering filters packets forwarded at Layer 3.
Views
VLAN interface view
Predefined user roles
network-admin
Parameters
route: Filters packets forwarded at Layer 3 by the VLAN interface.
all: Filters all packets, including packets forwarded at Layer 3 by the VLAN interface and packets
forwarded at Layer 2 by the physical ports associated with the VLAN interface.
Examples
# Configure the packet filtering on VLAN-interface 2 to filter packets forwarded at Layer 3.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] packet-filter filter route
reset acl counter
Use reset acl counter to clear statistics for ACLs.
Syntax
reset acl [ ipv6 | mac ] counter { acl-number | all | name acl-name }
Views
User view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 ACL type.
17