H3C S6812 Series Command Reference Manual page 1852

undo portal device-id
Default
A device is not configured with a device ID.
Views
System view
Predefined user roles
network-admin
Parameters
device-id: Specifies a device ID for the device, a case-sensitive string of 1 to 63 characters.
Usage guidelines
The portal authentication server uses device IDs to identify the devices that send protocol packets to
the portal server.
Make sure the configured device ID is different than any other access devices communicating with
the same portal authentication server.
Examples
# Set the device ID of the device to 0002.0010.100.00.
<Sysname> system-view
[Sysname] portal device-id 0002.0010.100.00
portal domain (interface view)
Use portal [ ipv6 ] domain to specify a portal authentication domain on an interface. All portal users
accessing through the interface must use the authentication domain.
Use undo portal [ ipv6 ] domain to delete the configured portal authentication domain.
Syntax
portal [ ipv6 ] domain domain-name
undo portal [ ipv6 ] domain
Default
No portal authentication domain is configured on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Specifies an authentication domain for IPv6 portal users. Do not specify this keyword for IPv4
portal users.
domain-name: Specifies an ISP authentication domain by its name, a case-insensitive string of 1 to
255 characters.
Usage guidelines
You can specify both an IPv4 portal authentication domain and an IPv6 portal authentication domain
on an interface.
Do not specify the ipv6 keyword for IPv4 portal users.
38