H3C S6812 Series Command Reference Manual page 1575

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays global QoS policies for the master device.
Usage guidelines
If you do not specify a direction, this command displays both inbound and outbound global QoS
policies.
Examples
# Display QoS policies applied globally.
<Sysname> display qos policy global
Direction: Inbound
Policy: 1
Classifier: 1
Operator: AND
Rule(s) :
If-match acl 2000
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 112 (kbps), CBS 7000 (Bytes), EBS 512 (Bytes)
Green action
Yellow action : pass
Red action
Green packets : 0 (Packets) 0 (Bytes)
Yellow packets: 0 (Packets) 0 (Bytes)
Red packets
Classifier: 2
Operator: AND
Rule(s) :
If-match protocol ipv6
Behavior: 2
Accounting enable:
0 (Packets)
Filter enable: Permit
Marking:
Remark dscp 3
Classifier: 3
Operator: AND
Rule(s) :
-none-
Behavior: 3
-none-
Table 8 Command output
Field
Direction
Green packets
Yellow packets
: pass
: discard
: 0 (Packets) 0 (Bytes)
Description
Direction (inbound or outbound ) in which the QoS policy is applied.
Statistics about green packets.
Statistics about yellow packets.
24