H3C S6812 Series Command Reference Manual page 1754

[Sysname-hwtacacs-hwt1] user-name-format without-domain
Related commands
display hwtacacs scheme
LDAP commands
attribute-map
Use attribute-map to specify the LDAP attribute map in an LDAP scheme.
Use undo attribute-map to restore the default.
Syntax
attribute-map map-name
undo attribute-map
Default
An LDAP scheme does not use an LDAP attribute map.
Views
LDAP scheme view
Predefined user roles
network-admin
Parameters
map-name: Specifies an LDAP attribute map by its name, a case-insensitive string of 1 to 31
characters.
Usage guidelines
When the LDAP scheme used for authorization contains an LDAP attribute map, the device converts
server-assigned LDAP attributes to device-recognizable AAA attributes based on the mapping
entries.
You can specify only one LDAP attribute map in an LDAP scheme. If you execute this command
multiple times, the most recent configuration takes effect.
If you specify another attribute map or change the mapping entries, the new settings are effective
only on the LDAP authorization that occurs after your operation.
Examples
# Specify LDAP attribute map map1 in LDAP scheme test.
<Sysname> system-view
[Sysname] ldap scheme test
[Sysname-ldap-test] attribute-map map1
Related commands
display ldap-scheme
ldap attribute-map
authentication-server
Use authentication-server to specify the LDAP authentication server for an LDAP scheme.
113