H3C S6812 Series Command Reference Manual page 1700

Examples
# In RADIUS scheme radius1, configure a RADIUS attribute rejection rule to delete the Connect-Info
attribute from the RADIUS packets to be sent.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute reject Connect-Info sent
Related commands
attribute translate
attribute remanent-volume
Use attribute remanent-volume to set the data measurement unit for the Remanent_Volume
attribute.
Use undo attribute remanent-volume to restore the default.
Syntax
attribute remanent-volume unit { byte | giga-byte | kilo-byte | mega-byte }
undo attribute remanent-volume unit
Default
The data measurement unit is kilobyte for the Remanent_Volume attribute.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
byte: Specifies the unit as byte.
giga-byte: Specifies the unit as gigabyte.
kilo-byte: Specifies the unit as kilobyte.
mega-byte: Specifies the unit as megabyte.
Usage guidelines
Make sure the measurement unit is the same as the user data measurement unit on the RADIUS
server.
Examples
# In RADIUS scheme radius1, set the data measurement unit to kilobyte for the Remanent_Volume
attribute.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute remanent-volume unit kilo-byte
Related commands
display radius scheme
attribute translate
Use attribute translate to enable the RADIUS attribute translation feature.
59