H3C S6812 Series Command Reference Manual page 1839

Destination:
Port
IPv6 web-redirect rules on vlan-interface 100:
Rule 1:
Type
Action
Status
Source:
VLAN
Protocol
Destination:
Port
Table 9 Command output
Field
Rule
Type
Action
Status
Source
IP
Mask
Prefix length
VLAN
Protocol
Destination
Port
free-traffic threshold
Use free-traffic threshold to specify the free-traffic threshold for portal users.
Use undo free-traffic threshold to restore the default.
Syntax
free-traffic threshold value
: 80
: Static
: Redirect
: Active
: Any
: TCP
: 80
Description
Number of the Web redirect rule.
Type of the Web redirect rule:
•
Static—Static Web redirect rule, generated when the Web redirect
feature takes effect.
•
Dynamic—Dynamic Web redirect rule, generated when a user visits a
redirect webpage.
Action in the Web redirect rule:
•
Permit—Allows packets to pass.
•
Redirect—Redirects the packets.
Status of the Web redirect rule:
•
Active—The Web redirect rule is effective.
•
Inactive—The Web redirect rule is not effective.
Source information in the Web redirect rule.
Source IP address.
Subnet mask of the source IPv4 address.
Prefix length of the source IPv6 address.
Source VLAN. If not specified, this field displays Any.
Transport layer protocol in the Web redirect rule:
•
Any—No transport layer protocol is limited.
•
TCP—Transmission Control Protocol.
Destination information in the Web redirect rule.
Destination transport layer port number. The default port number is 80.
25