H3C S6812 Series Command Reference Manual page 1712

primary authentication (RADIUS scheme view)
Use primary authentication to specify the primary RADIUS authentication server.
Use undo primary authentication to restore the default.
Syntax
primary authentication { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | test-profile profile-name | weight weight-value ] *
undo primary authentication
Default
The primary RADIUS authentication server is not specified.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary RADIUS authentication server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS authentication server.
port-number: Specifies the service port number of the primary RADIUS authentication server. The
value range for the UDP port number is 1 to 65535. The default setting is 1812.
key: Specifies the shared key for secure communication with the primary RADIUS authentication
server.
cipher: Specifies the key in encrypted form.
simple: Specifies the key in plaintext form. For security purposes, the key specified in plaintext form
will be stored in encrypted form.
string: Specifies the key. This argument is case sensitive.
•
In non-FIPS mode, the encrypted form of the key is a string of 1 to 117 characters. The plaintext
form of the key is a string of 1 to 64 characters.
•
In FIPS mode, the encrypted form of the key is a string of 15 to 117 characters. The plaintext
form of the key is a string of 15 to 64 characters. The plaintext string must contain digits,
uppercase letters, lowercase letters, and special characters.
test-profile profile-name: Specifies a test profile for detecting the RADIUS server status. The
profile-name argument is a case-sensitive string of 1 to 31 characters.
weight weight-value: Specifies a weight value for the RADIUS server. The value range for the
weight-value argument is 0 to 100, and the default value is 0. The value 0 indicates that the RADIUS
server will not be used for load sharing. This option takes effect only when the RADIUS server load
sharing feature is enabled for the RADIUS scheme. A larger weight value represents a higher
capacity to process authentication requests.
Usage guidelines
Make sure the service port and shared key settings of the primary RADIUS authentication server are
the same as those configured on the server.
Two authentication servers specified for a scheme, primary or secondary, cannot have identical IP
address and port number settings.
The shared key configured by this command takes precedence over the shared key configured with
the key authentication command.
71