H3C S6812 Series Command Reference Manual page 1558

traffic classifier
Use traffic classifier to create a traffic class and enter its view, or enter the view of an existing traffic
class.
Use undo traffic classifier to delete a traffic class.
Syntax
traffic classifier classifier-name [ operator { and | or } ]
undo traffic classifier classifier-name
Default
No traffic classes exist.
Views
System view
Predefined user roles
network-admin
Parameters
classifier-name: Specifies a name for the traffic class, a case-sensitive string of 1 to 31 characters.
operator: Sets the operator to logic AND (the default) or OR for the traffic class.
and: Specifies the logic AND operator. The traffic class matches the packets that match all its
criteria.
or: Specifies the logic OR operator. The traffic class matches the packets that match any of its
criteria.
Examples
# Create a traffic class named class1.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1]
Related commands
display traffic classifier
Traffic behavior commands
accounting
Use accounting to configure a traffic accounting action in a traffic behavior.
Use undo accounting to restore the default.
Syntax
accounting { byte | packet }
undo accounting
Default
No traffic accounting action is configured.
7