H3C S6812 Series Command Reference Manual page 1555

Protocol
dot1x
http
https
icmp
icmpv6
igmp
ip-option
ipv6-option
lacp
lldp
mvrp
ospf-multicast
ospf-unicast
ospf3-multicast
ospf3-unicast
snmp
ssh
stp
telnet
Usage guidelines
In a traffic class with the logical OR operator, you can configure multiple if match commands for any
of the available match criteria.
When you configure a match criterion that can have multiple values in one if-match command,
follow these restrictions and guidelines:
•
You can specify up to eight values for any of the following match criteria in one if-match
command:
Control plane protocol.

802.1p priority.

DSCP.

IP precedence.

VLAN ID.

•
If a packet matches one of the specified values, it matches the if-match command.
•
To delete a criterion that has multiple values, the specified values in the undo if-match
command must be the same as those specified in the if-match command. The order of the
values can be different.
When you configure ACL-based match criteria, follow these restrictions and guidelines:
•
If the ACL used as a match criterion does not exist, the traffic class cannot be applied to
hardware.
Description
802.1X packets
HTTP packets
HTTPS packets
ICMP packets
ICMPv6 packets
IGMP packets
IPv4 packets with the Options field
IPv6 packets with the Options field
LACP packets
LLDP packets
MVRP packets (including GVRP packets)
OSPF multicast packets
OSPF unicast packets
OSPFv3 multicast packets
OSPFv3 unicast packets
SNMP packets
SSH packets
STP packets
Telnet packets
4