H3C S6812 Series Command Reference Manual page 1758

ip
Use ip to configure the IP address of the LDAP server.
Use undo ip to restore the default.
Syntax
ip ip-address [ port port-number ]
undo ip
Default
An LDAP server does not have an IP address.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of the LDAP server.
port port-number: Specifies the TCP port number of the LDAP server. The value range for the
port-number argument is 1 to 65535, and the default value is 389.
Usage guidelines
The LDAP service port configured on the device must be consistent with the service port of the LDAP
server.
If you change the IP address and port number of the LDAP server, the change is effective only on the
LDAP authentication that occurs after the change.
Examples
# Specify the IP address and port number as 192.168.0.10 and 4300 for LDAP server ccc.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] ip 192.168.0.10 port 4300
Related commands
ldap server
ipv6
Use ipv6 to configure the IPv6 address of the LDAP server.
Use undo ipv6 to restore the default.
Syntax
ipv6 ipv6-address [ port port-number ]
undo ipv6
Default
An LDAP server does not have an IPv6 address.
Views
LDAP server view
117