H3C S6812 Series Command Reference Manual page 1613

byte-count: Allocates bandwidth to queues based on byte count.
weight: Allocates bandwidth to queues based on packet count.
schedule-value: Specifies a scheduling weight in the range of 1 to 127.
Examples
# Create a queue scheduling profile named myprofile, and configure queue 0 to use SP.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile] queue 0 sp
# Create a queue scheduling profile named myprofile. Configure queue 1 to meet the following
requirements:
•
The WRR queuing is used.
•
The WRR group is group 1.
•
The scheduling weight is 10.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile] queue 1 wrr group 1 weight 10
Related commands
display qos qmprofile interface
qos qmprofile
62