H3C S6812 Series Command Reference Manual page 1548

Default
A rule does not have a comment.
Views
IPv4 basic/advanced ACL view
IPv6 basic/advanced ACL view
Layer 2 ACL view
Predefined user roles
network-admin
Parameters
rule-id: Specifies an ACL rule ID in the range of 0 to 65534. The ACL rule must already exist.
text: Specifies a comment about the ACL rule, a case-sensitive string of 1 to 127 characters.
Usage guidelines
This command adds a comment to a rule if the rule does not have a comment. It modifies the
comment for a rule if the rule already has a comment.
Examples
# Create a rule for IPv4 basic ACL 2000, and add a comment about the rule.
<Sysname> system-view
[Sysname] acl basic 2000
[Sysname-acl-ipv4-basic-2000] rule 0 deny source 1.1.1.1 0
[Sysname-acl-ipv4-basic-2000] rule 0 comment This rule is used on ten-gigabitethernet
1/0/1.
Related commands
display acl
step
Use step to set a rule numbering step for an ACL.
Use undo step to restore the default.
Syntax
step step-value
undo step
Default
The rule numbering step is five.
Views
IPv4 basic/advanced ACL view
IPv6 basic/advanced ACL view
Layer 2 ACL view
Predefined user roles
network-admin
Parameters
step-value: Specifies the ACL rule numbering step in the range of 1 to 20.
33