H3C S6812 Series Command Reference Manual page 1777

Related commands
display dot1x
dot1x critical eapol
Use dot1x critical eapol to enable the sending of an EAP-Success packet to a client when the
802.1X client user is assigned to the 802.1X critical VLAN on a port.
Use undo dot1x critical eapol to restore the default.
Syntax
dot1x critical eapol
undo dot1x critical eapol
Default
The device sends an EAP-Failure packet to a client when the 802.1X client user is assigned to the
802.1X critical VLAN on a port.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
This command allows specific 802.1X users in the critical VLAN to pass reauthentication directly
when the device detects a reachable server. The device sends EAP-Success packets to the 802.1X
clients that cannot respond to the EAP-Request packets of the device (for example, the Windows
built-in 802.1X client).
Examples
# Send an EAP-Success packet to a client when the 802.1X client user is assigned to the 802.1X
critical VLAN on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x critical eapol
Related commands
dot1x critical vlan
dot1x critical vlan
Use dot1x critical vlan to configure an 802.1X critical VLAN on a port.
Use undo dot1x critical vlan to restore the default.
Syntax
dot1x critical vlan critical-vlan-id
undo dot1x critical vlan
Default
No 802.1X critical VLAN exists on a port.
Views
Ethernet interface view
9