H3C S6812 Series Command Reference Manual page 1846

Predefined user roles
network-admin
Parameters
port-number: Specifies the listening UDP port number in the range of 1 to 65534.
Usage guidelines
The specified port number must be the same as the query listening port number configured on the
MAC binding server.
Examples
# Set the UDP port number to 1000 for MAC binding server pts to listen for MAC binding query
packets.
<sysname> system-view
[sysname] portal mac-trigger-server mts
[sysname-portal-mac-trigger-server-mts] port 1000
Related commands
display mac-trigger-server
port (portal authentication server view)
Use port to set the destination UDP port number used by the device to send unsolicited portal
packets to the portal authentication server.
Use undo port to restore the default.
Syntax
port port-number
undo port
Default
The device uses 50100 as the destination UDP port number for unsolicited portal packets.
Views
Portal authentication server view
Predefined user roles
network-admin
Parameters
port-number: Specifies a destination UDP port number the device uses to send unsolicited portal
packets to the portal authentication server. The value range for this argument is 1 to 65534.
Usage guidelines
The specified port must be the port that listens to portal packets on the portal authentication server.
Examples
# Set the destination UDP port number to 50000 for the device to send unsolicited portal packets to
portal authentication server pts.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] port 50000
32