H3C S6812 Series Command Reference Manual page 1621

Parameters
car-name: Specifies an aggregate CAR action by its name. This argument must start with a letter,
and is a case-sensitive string of 1 to 31 characters. If you do not specify an aggregate CAR action,
this command displays information about all aggregate CAR actions.
Examples
# Display information about all aggregate CAR actions.
<Sysname> display qos car name
Name: a
Mode: aggregative
CIR 32 (kbps) CBS: 2062 (Bytes) PIR: 888 (kbps) EBS: 0 (Bytes)
Green action
Yellow action : pass
Red action
Slot 0:
Green packets : 0 (Packets), 0 (Bytes)
Yellow packets: 0 (Packets), 0 (Bytes)
Red packets
Slot 1:
Green packets : 0 (Packets), 0 (Bytes)
Yellow packets: 0 (Packets), 0 (Bytes)
Red packets
Slot 2:
Apply failed
Table 27 Command output
Field
Name
Mode
CIR CBS PIR EBS
Green action
Yellow action
Red action
Green packet
Yellow packet
Red packet
qos car
Use qos car aggregative to configure an aggregate CAR action.
: pass
: discard
: 0 (Packets), 0 (Bytes)
: 0 (Packets), 0 (Bytes)
Description
Name of the aggregate CAR action.
Type of the CAR action, which can only be aggregative.
Parameters for the CAR action.
Action to take on green packets:
•
•
Action to take on yellow packets:
•
•
Action to take on red packets:
•
•
Statistics about green packets.
Statistics about yellow packets.
Statistics about red packets.
discard—Drops the packets.
pass—Permits the packets to pass through.
discard—Drops the packets.
pass—Permits the packets to pass through.
discard—Drops the packets.
pass—Permits the packets to pass through.
70