H3C S6812 Series Command Reference Manual page 1927

<Sysname> system-view
[Sysname] password-control login-attempt 2 exceed lock-time 3
# Use the user account test to log in to the device, and enter incorrect password for two attempts.
# Display the password control blacklist. The output shows that the user account is on the blacklist
and its status is lock.
[Sysname] display password-control blacklist
Username: test
IP: 192.168.44.1
Blacklist items matched: 1.
# Verify that after 3 minutes, the user account is removed from the password control blacklist and the
user at 192.168.44.1 can use this account.
Related commands
display local-user
display password-control
display password-control blacklist
display user-group
reset password-control blacklist
password-control super aging
Use password-control super aging to set the expiration time for super passwords.
Use undo password-control super aging to restore the default.
Syntax
password-control super aging aging-time
undo password-control super aging
Default
A super password expires after 90 days.
Views
System view
Predefined user roles
network-admin
Parameters
aging-time: Specifies the super password expiration time in days, in the range of 1 to 365.
Examples
# Set the super passwords to expire after 10 days.
<Sysname> system-view
[Sysname] password-control super aging 10
Related commands
display password-control
password-control aging
Login failures: 2
15
Lock flag: lock