H3C S6812 Series Command Reference Manual page 1805

[Sysname-Ten-GigabitEthernet1/0/1] mac-authentication host-mode multi-vlan
Related commands
display mac-authentication
mac-authentication max-user
Use mac-authentication max-user to set the maximum number of concurrent MAC authentication
users on a port.
Use undo mac-authentication max-user to restore the default.
Syntax
mac-authentication max-user max-number
undo mac-authentication max-user
Default
The device allows a maximum of 4294967295 concurrent MAC authentication users on a port.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
max-number: Specifies the maximum number of concurrent MAC authentication users on the port.
The value range for this argument is 1 to 4294967295.
Usage guidelines
Set the maximum number of concurrent MAC authentication users on a port to prevent the system
resources from being overused. When the maximum number is reached, the port denies subsequent
MAC authentication users.
Examples
# Configure Ten-GigabitEthernet 1/0/1 to support a maximum of 32 concurrent MAC authentication
users.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mac-authentication max-user 32
Related commands
display mac-authentication
mac-authentication offline-detect enable
Use mac-authentication offline-detect enable to enable MAC authentication offline detection on a
port.
Use undo mac-authentication offline-detect enable to disable MAC authentication offline
detection.
Syntax
mac-authentication offline-detect enable
undo mac-authentication offline-detect enable
10