H3C S6812 Series Command Reference Manual page 1563

Parameters
vlan-id vlan-id: Specifies the VLAN ID to be added in the outer VLAN tag, in the range of 1 to 4094.
Usage guidelines
If a QoS policy contains an outer VLAN tag adding action, apply it only to the incoming traffic of an
interface.
If you execute the nest top-most command multiple times in the same traffic behavior, the most
recent configuration takes effect.
Examples
# Configure traffic behavior b1 to add an outer VLAN tag with VLAN ID 123.
<Sysname> system-view
[Sysname] traffic behavior b1
[Sysname-behavior-b1] nest top-most vlan 123
redirect
Use redirect to configure a traffic redirecting action in a traffic behavior.
Use undo redirect to restore the default.
Syntax
redirect { cpu | interface interface-type interface-number }
undo redirect { cpu | interface interface-type interface-number }
Default
No traffic redirecting action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
cpu: Redirects traffic to the CPU.
interface interface-type interface-number: Redirects traffic to an interface specified by its type and
number.
slot slot-number: Redirects traffic to an IRF member device specified by its member ID.
Usage guidelines
If you execute the redirect command multiple times in the same traffic behavior, the most recent
configuration takes effect.
A traffic redirecting action can be applied only to the inbound direction.
Examples
# Configure redirecting traffic to Ten-GigabitEthernet 1/0/1 in traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface ten-gigabitethernet 1/0/1
Related commands
classifier behavior
12