H3C S6812 Series Command Reference Manual page 1705

------------------------------------------------------------------
Table 4 Command output
Field
Index
Primary authentication server
Primary accounting server
Second authentication server
Second accounting server
IP
Port
VPN
State
Test profile
Probe username
Probe interval
Weight
Accounting-On function
extended function
retransmission times
retransmission
interval(seconds)
Timeout Interval(seconds)
Retransmission times
Retransmission Times for
Accounting Update
Server Quiet Period(minutes)
Realtime Accounting
Interval(seconds)
NAS IP Address
VPN
User Name Format
Description
Index number of the RADIUS scheme.
Information about the primary authentication server.
Information about the primary accounting server.
Information about the secondary authentication server.
Information about the secondary accounting server.
IP address of the server. If no server is configured, this field displays Not
configured.
Service port number of the server. If no port number is specified, this field
displays the default port number.
This field is not supported in the current software version.
MPLS L3VPN instance to which the server belongs. If no VPN instance is
specified for the server, this field displays Not configured.
Status of the server:
•
Active—The server is in active state.
•
Block—The server is changed to blocked state automatically.
•
Block (Mandatory)—The server is set to blocked state manually.
Test profile used for RADIUS server status detection.
Username used for RADIUS server status detection.
Server status detection interval, in minutes.
Weight value of the RADIUS server.
Whether the accounting-on feature is enabled.
Whether the extended accounting-on feature is enabled.
Number of accounting-on packet transmission attempts.
Interval at which the device retransmits accounting-on packets, in
seconds.
RADIUS server response timeout period, in seconds.
Maximum number of attempts for transmitting a RADIUS packet to a
single RADIUS server.
Maximum number of accounting attempts.
Quiet period for the servers, in minutes.
Interval for sending real-time accounting updates, in seconds.
Source IP address for outgoing RADIUS packets.
This field is not supported in the current software version.
MPLS L3VPN instance to which the RADIUS scheme belongs. If no VPN
instance is specified for the server, this field displays Not configured.
Format for the usernames sent to the RADIUS server:
•
with-domain—Includes the domain name.
•
without-domain—Excludes the domain name.
64