H3C S6812 Series Command Reference Manual page 1680

Examples
# Configure a description for network access user 123.
<Sysname> system-view
[Sysname] local-user 123 class network
[Sysname-luser-network-123] description Manager of MSC company
Related commands
display local-user
display local-user
Use display local-user to display the local user configuration and online user statistics.
Syntax
display local-user [ class { manage | network } | idle-cut { disable | enable } | service-type { ftp
| http | https | lan-access | portal | ssh | telnet | terminal } | state { active | block } | user-name
user-name class { manage | network } | vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
class: Specifies the local user type.
manage: Device management user.
network: Network access user.
idle-cut { disable | enable }: Specifies local users with the idle cut feature disabled or enabled.
service-type: Specifies the local users who use a specific type of service.
ftp: FTP users.
http: HTTP users.
https: HTTPS users.
lan-access: LAN users who typically access the network through an Ethernet, such as 802.1X
users.
portal: Portal users.
ssh: SSH users.
telnet: Telnet users.
terminal: Terminal users who log in through console ports.
state { active | block }: Specifies local users in active or blocked state. A local user in active state
can access network services, but a local user in blocked state cannot.
user-name user-name: Specifies all local users using the specified username. The username must
be a case-sensitive string of 1 to 55 characters. The name must meet the following requirements:
•
Cannot contain the domain name.
•
Cannot contain any of the following characters: forward slash (/), backslash (\), vertical bar (|),
colon (:), asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), and at
sign (@).
39