H3C S6812 Series Command Reference Manual page 1529

Field
IPv6 default action
MAC default action
display qos-acl resource
Use display qos-acl resource to display QoS and ACL resource usage.
Syntax
display qos-acl resource [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays QoS and ACL resource usage for all member devices.
Examples
# Display QoS and ACL resource usage.
<Sysname> display qos-acl resource
Interfaces: XGE1/0/1 to XGE1/0/16 (slot 1)
---------------------------------------------------------------------
Type
---------------------------------------------------------------------
VFP ACL
IFP ACL
IFP Meter
IFP Counter
EFP ACL
EFP Meter
Total Reserved
512 16
2048 516
2048 515
2048 515
512 0
512 0
Description
applied for packet filtering.
Packet filter default action for packets that do not match any
IPv6 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
•
Permit—The default action permit has been successfully
applied for packet filtering.
Packet filter default action for packets that do not match any
Layer 2 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
•
Permit—The default action permit has been successfully
applied for packet filtering.
Configured Remaining
0 496
0 1532
0 1533
0 1533
0 512
0 512
14
Usage
3%
25%
25%
25%
0%
0%