H3C S6812 Series Command Reference Manual page 1696

<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute 31 mac-format section six separator : lowercase
Related commands
display radius scheme
attribute convert (RADIUS DAE server view)
Use attribute convert to configure a RADIUS attribute conversion rule.
Use undo attribute convert to delete RADIUS attribute conversion rules.
Syntax
attribute convert src-attr-name to dest-attr-name { { coa-ack | coa-request } * | { received | sent }
* }
undo attribute convert [ src-attr-name ]
Default
No RADIUS attribute conversion rules exist. The system processes RADIUS attributes according to
the principles of the standard RADIUS protocol.
Views
RADIUS DAE server view
Predefined user roles
network-admin
Parameters
src-attr-name: Specifies the source RADIUS attribute by its name, a case-insensitive string of 1 to 63
characters. The attribute must be supported by the system.
dest-attr-name: Specifies the destination RADIUS attribute by its name, a case-insensitive string of 1
to 63 characters. The attribute must be supported by the system.
coa-ack: Specifies the CoA acknowlegment packets.
coa-request: Specifies the CoA request packets.
received: Specifies the received DAE packets.
sent: Specifies the sent DAE packets.
Usage guidelines
The device replaces the attribute in packets that match a RADIUS attribute conversion rule with the
destination RADIUS attribute in the rule.
The conversion rules take effect only when the RADIUS attribute translation feature is enabled.
When you configure RADIUS attribute conversion rules, follow these restrictions and guidelines:
•
The source and destination RADIUS attributes in a rule must use the same data type.
•
The source and destination RADIUS attributes in a rule cannot use the same name.
•
A source RADIUS attribute can be converted only by one criterion, packet type or direction.
•
One source RADIUS attribute cannot be converted to multiple destination attributes.
If you do not specify a source RADIUS attribute, the undo attribute convert command deletes all
RADIUS attribute conversion rules.
55