H3C S6812 Series Command Reference Manual page 1697

Examples
# In RADIUS DAE server view, configure a RADIUS attribute conversion rule to replace the
Hw-Server-String attribute in the received DAE packets with the H3c-User-Roles attribute.
<Sysname> system-view
[Sysname] radius dynamic-author server
[Sysname-radius-da-server] attribute convert Hw-Server-String to H3c-User-Roles received
Related commands
attribute translate
attribute convert (RADIUS scheme view)
Use attribute convert to configure a RADIUS attribute conversion rule.
Use undo attribute convert to delete RADIUS attribute conversion rules.
Syntax
attribute convert src-attr-name to dest-attr-name { { access-accept | access-request |
accounting } * | { received | sent } * }
undo attribute convert [ src-attr-name ]
Default
No RADIUS attribute conversion rules exist. The system processes RADIUS attributes according to
the principles of the standard RADIUS protocol.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
src-attr-name: Specifies the source RADIUS attribute by its name, a case-insensitive string of 1 to 63
characters. The attribute must be supported by the system.
dest-attr-name: Specifies the destination RADIUS attribute by its name, a case-insensitive string of 1
to 63 characters. The attribute must be supported by the system.
access-accept: Specifies the RADIUS Access-Accept packets.
access-request: Specifies the RADIUS Access-Request packets.
accounting: Specifies the RADIUS accounting packets.
received: Specifies the received RADIUS packets.
sent: Specifies the sent RADIUS packets.
Usage guidelines
The device replaces the attribute in packets that match a RADIUS attribute conversion rule with the
destination RADIUS attribute in the rule.
The conversion rules take effect only when the RADIUS attribute translation feature is enabled.
When you configure RADIUS attribute conversion rules, follow these restrictions and guidelines:
•
The source and destination RADIUS attributes in a rule must use the same data type.
•
The source and destination RADIUS attributes in a rule cannot use the same name.
•
A source RADIUS attribute can be converted only by one criterion, packet type or direction.
56