H3C S6812 Series Command Reference Manual page 1770

Handshake
Handshake reply
Handshake security
Unicast trigger
Periodic reauth
Port role
Authorization mode
Port access control
Multicast trigger
Mandatory auth domain
Guest VLAN
Auth-Fail VLAN
Critical VLAN
Re-auth server-unreachable : Logoff
Max online users
Add Guest VLAN delay
EAPOL packets: Tx 3, Rx 3
Sent EAP Request/Identity packets : 1
EAP Request/Challenge packets: 1
EAP Success packets: 1
EAP Failure packets: 0
Received EAPOL Start packets : 1
EAPOL LogOff packets: 1
EAP Response/Identity packets : 1
EAP Response/Challenge packets: 1
Error packets: 0
Online 802.1X users: 1
MAC address
0001-0000-0000
Table 1 Command output
Field
Global 802.1X parameters
802.1X authentication
CHAP authentication
EAP authentication
PAP authentication
Max-tx period
Handshake period
Quiet timer
Quiet period
Supp timeout
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Authenticator
: Auto
: Port-based
: Enabled
: Not configured
: 3
: Not configured
: Not configured
: 256
: EAPOL
Auth state
Authenticated
Description
Global 802.1X configuration.
Whether 802.1X is enabled globally.
Performs EAP termination and uses CHAP to communicate with the
RADIUS server.
Relays EAP packets and supports any of the EAP authentication
methods to communicate with the RADIUS server.
Performs EAP termination and uses PAP to communicate with the
RADIUS server.
Username request timeout timer in seconds.
Handshake timer in seconds.
Status of the quiet timer, enabled or disabled.
Quiet timer in seconds.
Client timeout timer in seconds.
2