H3C S6812 Series Command Reference Manual page 1752

Parameters
minutes: Specifies the real-time accounting interval in minutes, in the range of 0 to 60. Setting this
interval to 0 disables the device from sending online user accounting information to the HWTACACS
accounting server.
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is used to set the interval.
A short interval helps improve accounting precision but requires many system resources.
Table 9 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# In HWTACACS scheme hwt1, set the real-time accounting interval to 51 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
Related commands
display hwtacacs scheme
timer response-timeout (HWTACACS scheme view)
Use timer response-timeout to set the HWTACACS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The HWTACACS server response timeout time is 5 seconds.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
seconds: Specifies the HWTACACS server response timeout time, in the range of 1 to 300 seconds.
Usage guidelines
HWTACACS is based on TCP. When the server response timeout timer or the TCP timeout timer
times out, the device is disconnected from the HWTACACS server.
Real-time accounting interval
3 minutes
6 minutes
12 minutes
15 minutes or longer
111