H3C S6812 Series Command Reference Manual page 1883

url
Use url to specify a URL for a portal Web server.
Use undo url to restore the default.
Syntax
url url-string
undo url
Default
No URL is specified for a portal Web server.
Views
Portal Web server view
Predefined user roles
network-admin
Parameters
url-string: Specifies a URL for the portal Web server, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command specifies a URL that can be accessed through standard HTTP or HTTPS. The URL
should start with http:// or https://. If the URL you specify does not start with http:// or https://, the
system considers the URL begins with http:// by default.
Examples
# Configure the URL for portal Web server wbs as http://www.test.com/portal.
<Sysname> system-view
[Sysname] portal web-server wbs
[Sysname-portal-websvr-wbs] url http://www.test.com/portal
Related commands
display portal web-server
url-parameter
Use url-parameter to configure the parameters carried in the URL of a portal Web server. The
access device redirects a portal user by sending the URL with the parameters to the user.
Use undo url-parameter to delete the parameters carried in the URL of the portal Web server.
Syntax
url-parameter param-name { nas-id | nas-port-id | original-url | source-address | source-mac
[ encryption { aes | des } key { cipher | simple } string ] | value expression }
undo url-parameter param-name
Default
No URL parameters are configured for a portal Web server.
Views
Portal Web server view
69