H3C S6812 Series Command Reference Manual page 1561

Parameters
user-defined: Specifies user-defined traffic behaviors.
behavior-name: Specifies a behavior by its name, a case-sensitive string of 1 to 31 characters. If you
do not specify a traffic behavior, this command displays all traffic behaviors.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays the traffic behaviors for the master device.
Examples
# Display all user-defined traffic behaviors.
<Sysname> display traffic behavior user-defined
User-defined behavior information:
Behavior: 1 (ID 100)
Marking:
Remark dscp 3
Committed Access Rate:
CIR 200 (kbps), CBS 51200 (Bytes), EBS 512 (Bytes)
Green action
Yellow action : pass
Red action
Assured Forwarding:
Bandwidth 30 (kbps)
Discard Method: Tail
Behavior: 2 (ID 101)
Accounting enable: Packet
Filter enable: Permit
Marking:
Remark dscp 4
Redirecting:
Redirect to the CPU
Table 4 Command output
Field
Behavior
Marking
Remark dscp
Committed Access Rate
Green action
Yellow action
Red action
Bandwidth
Accounting enable
Filter enable
: pass
: discard
Description
Name and contents of a traffic behavior.
Information about priority marking.
Action of setting the DSCP value for packets.
Information about the CAR action.
Action to take on green packets.
Action to take on yellow packets.
Action to take on red packets.
Bandwidth of the queue.
Traffic accounting action.
Traffic filtering action.
10