H3C S6812 Series Command Reference Manual page 1518

Syntax
acl [ ipv6 | mac ] copy { source-acl-number | name source-acl-name } to { dest-acl-number | name
dest-acl-name }
Views
System view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 ACL type.
mac: Specifies the Layer 2 ACL type.
source-acl-number: Specifies an existing source ACL by its number.
•
2000 to 2999 for basic ACLs.
•
3000 to 3999 for advanced ACLs.
•
4000 to 4999 for Layer 2 ACLs.
name source-acl-name: Specifies an existing source ACL by its name. The source-acl-name
argument is a case-insensitive string of 1 to 63 characters.
dest-acl-number: Assigns a unique number to the new ACL. Available value ranges include:
•
2000 to 2999 for basic ACLs.
•
3000 to 3999 for advanced ACLs.
•
4000 to 4999 for Layer 2 ACLs.
name dest-acl-name: Assigns a unique name to the new ACL. The dest-acl-name argument is a
case-insensitive string of 1 to 63 characters. It must start with an English letter and to avoid
confusion, it cannot be all.
Usage guidelines
The new ACL and the source ACL must be the same type.
The new ACL has the same properties and content as the source ACL, but uses a different number
or name from the source ACL.
To specify the IPv4 ACL type, do not specify the ipv6 or mac keyword.
Examples
# Create IPv4 basic ACL 2002 by copying IPv4 basic ACL 2001.
<Sysname> system-view
[Sysname] acl copy 2001 to 2002
# Create IPv4 basic ACL paste by copying IPv4 basic ACL test.
<Sysname> system-view
[Sysname] acl copy name test to name paste
acl logging interval
Use acl logging interval to enable logging for packet filtering and set the interval.
Use undo acl logging interval to restore the default.
Syntax
acl logging interval interval
3