H3C S6812 Series Command Reference Manual page 1887

Related commands
display mac-trigger-server
portal mac-trigger-server
web-redirect url
Use web-redirect url to enable the Web redirect feature.
Use undo web-redirect url to disable the Web redirect feature.
Syntax
web-redirect [ ipv6 ] url url-string [ interval interval ]
undo web-redirect [ ipv6 ]
Default
The Web redirect feature is disabled.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Specifies the IPv6 Web redirect feature. Do not specify this keyword for the IPv4 Web redirect
feature.
url url-string: Specifies the URL to which the user is redirected. The URL is required to be complete
and begins with http:// or https://, a string of 1 to 256 characters.
interval interval: Specifies the time interval at which the user is redirected to the specified URL. It is
in the range of 60 to 86400 seconds. The default interval is 86400 seconds.
Usage guidelines
With Web direct enabled on an interface, a user on the interface is first redirected to the specified
URL before the user can access an external network through a Web browser. After the specified
interval, the user is redirected to the specified URL again.
Web redirect does not work when both Web redirect and portal authentication are enabled.
The Web redirect feature takes effect only on HTTP packets that use the default port number 80.
Examples
# Configure IPv4 Web redirect on VLAN-interface 100. Set the redirect URL to http://192.0.0.1 and
the interval to 3600 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname–Vlan-interface100] web-redirect url http://192.0.0.1 interval 3600
Related commands
display web-redirect rule
73