H3C S6812 Series Command Reference Manual page 1710

Syntax
port port-number
undo port
Default
The RADIUS DAE server port number is 3799.
Views
RADIUS DAE server view
Predefined user roles
network-admin
Parameters
port-number: Specifies a UDP port number in the range of 1 to 65535.
Usage guidelines
The destination port in DAE packets on the DAE client must be the same as the RADIUS DAE server
port on the DAE server.
Examples
# Enable the RADIUS DAE server to listen to UDP port 3790 for DAE requests.
<Sysname> system-view
[Sysname] radius dynamic-author server
[Sysname-radius-da-server] port 3790
Related commands
client
radius dynamic-author server
primary accounting (RADIUS scheme view)
Use primary accounting to specify the primary RADIUS accounting server.
Use undo primary accounting to restore the default.
Syntax
primary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple }
string | weight weight-value ] *
undo primary accounting
Default
The primary RADIUS accounting server is not specified.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary RADIUS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS accounting server.
69