H3C S6812 Series Command Reference Manual page 1650

When the primary method is invalid, the device attempts to use the backup methods in sequence.
For example, the accounting portal radius-scheme radius-scheme-name local none command
specifies a primary default RADIUS accounting method and two backup methods (local accounting
and no accounting). The device performs RADIUS accounting by default and performs local
accounting when the RADIUS server is invalid. The device does not perform accounting when both
of the previous methods are invalid.
The following guidelines apply to broadcast accounting:
•
The device sends accounting requests to the primary accounting servers in the specified
broadcast RADIUS schemes at the same time. If the primary server is unavailable in a scheme,
the device sends accounting requests to the secondary servers of the scheme in the order the
servers are configured.
•
The accounting result is determined by the primary broadcast RADIUS scheme. The
accounting result from the backup scheme is used as reference only. If the primary scheme
does not return any result, the device considers the accounting as a failure.
Examples
# In ISP domain test, perform local accounting for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal local
# In ISP domain test, perform RADIUS accounting for portal users based on scheme rd and use
local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal radius-scheme rd local
# In ISP domain test, broadcast accounting requests of portal users to RADIUS servers in schemes
rd1 and rd2, and use local accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal broadcast radius-scheme rd1 radius-scheme rd2 local
Related commands
accounting default
local-user
radius scheme
accounting quota-out
Use accounting quota-out to configure access control for users who have used up their data
quotas.
Use undo accounting quota-out to restore the default.
Syntax
accounting quota-out { offline | online }
undo accounting quota-out
Default
The device logs off users who have used up their data quotas.
Views
ISP domain view
9