H3C S6812 Series Command Reference Manual page 1556

•
In a traffic class, you can add two if-match statements that use the same ACL as the match
criterion. In one statement, specify the ACL by its name. In the other statement, specify the ACL
by its number.
•
The ACL is used for classification only and the permit/deny actions in ACL rules are ignored.
Actions taken on matching packets are defined in traffic behaviors.
You can use both AND and OR operators to define the match relationships between the criteria for a
class. For example, you can define relationships among three match criteria in traffic class classA
as follows:
traffic classifier classB operator and
if-match criterion 1
if-match criterion 2
traffic classifier classA operator or
if-match criterion 3
Examples
# Define a match criterion for traffic class class1 to match the packets with a destination MAC
address of 0050-ba27-bed3.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match destination-mac 0050-ba27-bed3
# Define a match criterion for traffic class class2 to match the packets with a source MAC address of
0050-ba27-bed2.
<Sysname> system-view
[Sysname] traffic classifier class2
[Sysname-classifier-class2] if-match source-mac 0050-ba27-bed2
# Define a match criterion for traffic class class1 to match the double-tagged packets with 802.1p
priority 3 in the inner VLAN tag.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match customer-dot1p 3
# Define a match criterion for traffic class class1 to match the packets with 802.1p priority 5 in the
outer VLAN tag.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match service-dot1p 5
# Define a match criterion for traffic class class1 to match advanced ACL 3101.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match acl 3101
# Define a match criterion for traffic class class1 to match the ACL named flow.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match acl name flow
# Define a match criterion for traffic class class1 to match advanced IPv6 ACL 3101.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match acl ipv6 3101
# Define a match criterion for traffic class class1 to match the IPv6 ACL named flow.
5