When you delete a test profile, the device stops detecting the status of the RADIUS servers that use
the test profile.
Examples
# Configure a test profile named abc for RADIUS server status detection. The detection packet uses
admin as the username and is sent every 10 minutes.
<Sysname> system-view
[Sysname] radius-server test-profile abc username admin interval 10
Related commands
primary authentication (RADIUS scheme view)
secondary authentication (RADIUS scheme view)
reset radius statistics
Use reset radius statistics to clear RADIUS statistics.
Syntax
reset radius statistics
Views
User view
Predefined user roles
network-admin
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
Related commands
display radius statistics
retry
Use retry to set the maximum number of attempts for transmitting a RADIUS packet to a single
RADIUS server.
Use undo retry to restore the default.
Syntax
retry retries
undo retry
Default
The maximum number of RADIUS packet transmission attempts is 3.
Views
RADIUS scheme view
Predefined user roles
network-admin
79