H3C S6812 Series Command Reference Manual page 1726

radius-server test-profile
server-load-sharing enable
Use server-load-sharing enable to enable the RADIUS server load sharing feature.
Use undo server-load-sharing enable to disable the RADIUS server load sharing feature.
Syntax
server-load-sharing enable
undo server-load-sharing enable
Default
The RADIUS server load sharing feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
Usage guidelines
Use the RADIUS server load sharing feature to dynamically distribute the workload over multiple
servers regardless of their server roles. The device forwards an AAA request to the most appropriate
server of all active servers in the scheme after it compares the weight values and numbers of
currently served users. Specify a weight value for each RADIUS server based on the AAA capacity of
the server. A larger weight value indicates a higher AAA capacity.
In RADIUS server load sharing, once the device sends a start-accounting request to a server for a
user, it forwards all subsequent accounting requests of the user to the same server. If the accounting
server is unreachable, the device returns an accounting failure message rather than searching for
another active accounting server.
Examples
# Enable the RADIUS server load sharing feature for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] server-load-sharing enable
Related commands
primary authentication (RADIUS scheme view)
primary accounting (RADIUS scheme view)
secondary authentication (RADIUS scheme view)
secondary accounting (RADIUS scheme view)
snmp-agent trap enable radius
Use snmp-agent trap enable radius to enable SNMP notifications for RADIUS.
Use undo snmp-agent trap enable radius to disable SNMP notifications for RADIUS.
Syntax
snmp-agent trap enable radius [ accounting-server-down | accounting-server-up |
authentication-error-threshold | authentication-server-down | authentication-server-up ] *
85