H3C S6812 Series Command Reference Manual page 1568

Syntax
remark qos-local-id local-id-value
undo remark qos-local-id
Default
No local QoS ID marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
local-id-value: Specifies the local QoS ID to be marked for packets, in the range of 1 to 4095.
Usage guidelines
You can use one QoS policy to mark the local QoS ID for packets in the inbound direction. Then, you
can use another QoS policy to apply other QoS features in the outbound direction based on the
marked local QoS ID.
If you execute the remark qos-local-id command multiple times in the same traffic behavior, the
most recent configuration takes effect.
Examples
# Configure the action of marking packet with local QoS ID 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark qos-local-id 2
remark service-vlan-id
Use remark service-vlan-id to configure an SVLAN marking action in a traffic behavior.
Use undo remark service-vlan-id to restore the default.
Syntax
remark service-vlan-id vlan-id
undo remark service-vlan-id
Default
No SVLAN marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies an SVLAN ID in the range of 1 to 4094.
Examples
# Configure traffic behavior b1 to mark matching packets with SVLAN 222.
<Sysname> system-view
17