H3C S6812 Series Command Reference Manual page 1582

Field
Yellow packets
Red packets
For the description of other fields, see
qos apply policy (interface view, control plane view)
Use qos apply policy to apply a QoS policy to an interface or control plane.
Use undo qos apply policy to remove an applied QoS policy.
Syntax
qos apply policy policy-name { inbound | outbound }
undo qos apply policy policy-name { inbound | outbound } [ enhancement ]
Default
No QoS policy is applied.
Views
Control plane view
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
inbound: Applies the QoS policy to incoming traffic.
outbound: Applies the QoS policy to outgoing traffic. This keyword is not supported in control plane
view.
Usage guidelines
If a class uses control plane protocols or control plane protocol groups as match criteria, the action in
the associated traffic behavior can only be car or the combination of car and accounting packet.
Only the cir keyword in the car action can be applied correctly.
Examples
# Apply QoS policy USER1 to the outgoing traffic of Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos apply policy USER1 outbound
# Apply QoS policy aaa to the incoming traffic of the control plane of slot 3.
<Sysname> system-view
[Sysname] control-plane slot 3
[Sysname-cp-slot3] qos apply policy aaa inbound
qos apply policy (user profile view)
Use qos apply policy to apply a QoS policy to a user profile.
Description
Statistics about yellow packets.
Statistics about red packets.
Table 1 and
31
Table 4.