H3C S6812 Series Command Reference Manual page 1731

Syntax
timer realtime-accounting interval [ second ]
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
interval: Specifies the real-time accounting interval in the range of 0 to 71582.
second: Specifies the measurement unit as second. If you do not specify this keyword, the real-time
accounting interval is measured in minutes.
Usage guidelines
When the real-time accounting interval on the device is not zero, the device sends online user
accounting information to the RADIUS accounting server at the configured interval.
When the real-time accounting interval on the device is zero, the device sends online user
accounting information to the RADIUS accounting server at the real-time accounting interval
configured on the server. If the real-time accounting interval is not configured on the server, the
device does not send online user accounting information.
A short interval helps improve accounting precision but requires many system resources.
Table 6 Recommended real-time accounting intervals
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
Examples
# In RADIUS scheme radius1, set the real-time accounting interval to 51 minutes.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting
timer response-timeout (RADIUS scheme view)
Use timer response-timeout to set the RADIUS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
Real-time accounting interval
3 minutes
6 minutes
12 minutes
15 minutes or longer
90