H3C S6812 Series Command Reference Manual page 1660

Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform authorization. The following default authorization information applies after
users pass authentication:
•
Non-login users can access the network.
•
Login users are assigned the level-0 user role. Login users include the Telnet, FTP, SFTP, SCP,
and terminal users. Terminal users can access the device through the console port. For more
information about the level-0 user role, see RBAC configuration in Fundamentals Configuration
Guide.
•
The working directory for FTP, SFTP, and SCP login users is the root directory of the NAS.
However, the users do not have permission to access the root directory.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The default authorization method is used for all users who support this method and do not have an
authorization method configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
You can specify one primary authorization method and multiple backup authorization methods.
When the default authorization method is invalid, the device attempts to use the backup
authorization methods in sequence. For example, the authorization default radius-scheme
radius-scheme-name local none command specifies the default RADIUS authorization method and
two backup methods (local authorization and no authorization). The device performs RADIUS
authorization by default and performs local authorization when the RADIUS server is invalid. The
device does not perform authorization when both of the previous methods are invalid.
Examples
# In ISP domain test, use RADIUS scheme rd as the primary default authorization method and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization default radius-scheme rd local
Related commands
hwtacacs scheme
local-user
radius scheme
authorization lan-access
Use authorization lan-access to configure the authorization method for LAN users.
Use undo authorization lan-access to restore the default.
Syntax
In non-FIPS mode:
authorization lan-access { local [ none ] | none | radius-scheme radius-scheme-name [ local ]
[ none ] }
19