H3C S6812 Series Command Reference Manual page 1553

Table 1 Command output
Field
Classifier
Operator
Rule(s)
if-match
Use if-match to define a match criterion.
Use undo if-match to delete a match criterion.
Syntax
if-match match-criteria
undo if-match match-criteria
Default
No match criterion is configured.
Views
Traffic class view
Predefined user roles
network-admin
Parameters
match-criteria: Specifies a match criterion.
Table 2 Available match criteria
Option
acl [ ipv6 ] { acl-number |
name acl-name }
any
control-plane protocol
protocol-name&<1-8>
control-plane
protocol-group
protocol-group-name
customer-dot1p
Description
Traffic class name and its match criteria.
Match operator you set for the traffic class. If the operator is AND, the traffic class
matches the packets that match all its match criteria. If the operator is OR, the traffic
class matches the packets that match any of its match criteria.
Match criteria.
Description
Matches an ACL.
The value range for the acl-number argument is as follows:
•
2000 to 3999 for IPv4 ACLs.
•
2000 to 3999 for IPv6 ACLs.
•
4000 to 4999 for Layer 2 MAC ACLs.
The acl-name argument is a case-insensitive string of 1 to 63 characters,
which must start with an English letter. To avoid confusion, make sure the
argument is not all.
Matches all packets.
Matches control plane protocols.
The protocol-name&<1-8> argument specifies a space-separated list of up
to eight system-defined control plane protocols. For available
system-defined control plane protocols, see
Matches a control plane protocol group.
The protocol-group-name argument can be critical, important,
management, monitor, normal, or redirect.
Matches 802.1p priority values in inner VLAN tags of double-tagged
Table 2 shows the available match criteria.
2
Table 3.