H3C S6812 Series Command Reference Manual page 1774

Field
Authorization tagged VLAN list
Authorization ACL ID
Authorization user profile
Termination action
Session timeout period
Online from
Online duration
Total xxx connections matched.
dot1x
Use dot1x to enable 802.1X globally or on a port.
Use undo dot1x to disable 802.1X globally or on a port.
Syntax
dot1x
undo dot1x
Default
802.1X is neither enabled globally nor enabled for any port.
Views
System view
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
For the 802.1X feature to take effect on a port, you must enable the feature both globally and on the
port.
Examples
# Enable 802.1X globally.
<Sysname> system-view
[Sysname] dot1x
# Enable 802.1X on Ten-GigabitEthernet 1/0/1.
[Sysname] interface ten-gigabitethernet 1/0/1
Description
Tagged VLANs authorized to the user.
ACL authorized to the user.
User profile authorized to the user.
Action attribute assigned by the server to terminate the user session:
•
Default—Logs off the online authenticated 802.1X user when the
session timeout timer expires. This attribute does not take effect
when periodic online user reauthentication is enabled and the
periodic reauthentication timer is shorter than the session timeout
timer.
•
Radius-request—Reauthenticates the online user when the
session timeout timer expires, regardless of whether the periodic
online reauthentication feature is enabled or not.
If the device performs local authentication, this field displays N/A.
Session timeout timer assigned by the server.
If the device performs local authentication, this field displays N/A.
Time from which the 802.1X user came online.
Online duration of the 802.1X user.
Number of online 802.1X users.
6